# Pastebin zFGKoEsv [ +0.000045] r8152-cfgselector 1-1.1: USB disconnect, device number 9 [ +0.093507] usb 1-1.2: USB disconnect, device number 6 [ +0.000019] usb 1-1.2.3: USB disconnect, device number 7 [ +0.000007] usb 1-1.2.3.2: USB disconnect, device number 8 [ +0.000415] google ttyUSB0: google converter now disconnected from ttyUSB0 [ +0.000045] usb_serial_simple 1-1.2.3.2:1.0: device disconnected [ +0.000233] google ttyUSB1: google converter now disconnected from ttyUSB1 [ +0.000034] usb_serial_simple 1-1.2.3.2:1.1: device disconnected [ +0.000127] google ttyUSB2: google converter now disconnected from ttyUSB2 [ +0.000018] usb_serial_simple 1-1.2.3.2:1.2: device disconnected [Sep 3 07:40] usb 1-1: new high-speed USB device number 10 using xhci-hcd [ +0.166823] usb 1-1: New USB device found, idVendor=0bda, idProduct=5412, bcdDevice= 0.02 [ +0.000019] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ +0.000006] usb 1-1: Product: 3-Port USB 2.1 Hub [ +0.000005] usb 1-1: Manufacturer: Generic [ +0.059098] hub 1-1:1.0: USB hub found [ +0.000952] hub 1-1:1.0: 3 ports detected [ +0.064834] qcom-soundwire 6ab0000.soundwire: Failed to get cgcr reset ctrl required for SW gating [ +0.000895] qcom-soundwire 6b10000.soundwire: Failed to get cgcr reset ctrl required for SW gating [ +0.452623] ucsi_glink.pmic_glink_ucsi pmic_glink.ucsi.0: UCSI_GET_PDOS failed (-70) [ +0.262699] usb 1-1.1: new high-speed USB device number 11 using xhci-hcd [ +0.101087] usb 1-1.1: New USB device found, idVendor=0bda, idProduct=8153, bcdDevice=31.23 [ +0.000021] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=6 [ +0.000006] usb 1-1.1: Product: USB 10/100/1000 LAN [ +0.000005] usb 1-1.1: Manufacturer: Realtek [ +0.000005] usb 1-1.1: SerialNumber: 321000001 [ +0.141039] r8152-cfgselector 1-1.1: reset high-speed USB device number 11 using xhci-hcd [ +0.178878] r8152 1-1.1:1.0 eth0: v1.12.13 [ +0.000572] qcom-soundwire 6ab0000.soundwire: Failed to get cgcr reset ctrl required for SW gating [ +0.000081] qcom-soundwire 6b10000.soundwire: Failed to get cgcr reset ctrl required for SW gating [ +0.078524] usb 1-1.2: new high-speed USB device number 12 using xhci-hcd [ +0.122418] usb 1-1.2: New USB device found, idVendor=0bda, idProduct=5411, bcdDevice= 1.26 [ +0.000018] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ +0.000006] usb 1-1.2: Product: 4-Port USB 2.1 Hub [ +0.000005] usb 1-1.2: Manufacturer: Generic [ +0.067019] hub 1-1.2:1.0: USB hub found [ +0.001166] hub 1-1.2:1.0: 4 ports detected [ +0.064797] qcom-soundwire 6ab0000.soundwire: Failed to get cgcr reset ctrl required for SW gating [ +0.000189] qcom-soundwire 6b10000.soundwire: Failed to get cgcr reset ctrl required for SW gating [ +0.028531] r8152 1-1.1:1.0 enu1u1: renamed from eth0 [ +0.264074] usb 1-1.2.3: new high-speed USB device number 13 using xhci-hcd [ +0.148476] usb 1-1.2.3: New USB device found, idVendor=04b4, idProduct=6572, bcdDevice=32.99 [ +0.000023] usb 1-1.2.3: New USB device strings: Mfr=10, Product=11, SerialNumber=12 [ +0.000005] usb 1-1.2.3: Product: HX2VL Hub (Four port) [ +0.000007] usb 1-1.2.3: Manufacturer: Cypress Semiconductor [ +0.000005] usb 1-1.2.3: SerialNumber: 0011002A00B2 [ +0.036378] hub 1-1.2.3:1.0: USB hub found [ +0.001651] hub 1-1.2.3:1.0: 4 ports detected [ +0.002292] qcom-soundwire 6ab0000.soundwire: Failed to get cgcr reset ctrl required for SW gating [ +0.000108] qcom-soundwire 6b10000.soundwire: Failed to get cgcr reset ctrl required for SW gating [ +0.075780] [drm:dp_panel_read_sink_caps [msm]] *ERROR* read dpcd failed -110 [ +0.235145] usb 1-1.2.3.2: new full-speed USB device number 14 using xhci-hcd [ +0.136498] usb 1-1.2.3.2: New USB device found, idVendor=18d1, idProduct=5014, bcdDevice= 1.00 [ +0.000023] usb 1-1.2.3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=11 [ +0.000007] usb 1-1.2.3.2: Product: Cr50 [ +0.000004] usb 1-1.2.3.2: Manufacturer: Google Inc. [ +0.000006] usb 1-1.2.3.2: SerialNumber: 13024025-94A3D023 [ +0.009695] usb_serial_simple 1-1.2.3.2:1.0: google converter detected [ +0.000352] usb 1-1.2.3.2: google converter now attached to ttyUSB0 [ +0.000519] usb_serial_simple 1-1.2.3.2:1.1: google converter detected [ +0.000199] usb 1-1.2.3.2: google converter now attached to ttyUSB1 [ +0.000018] qcom-soundwire 6ab0000.soundwire: Failed to get cgcr reset ctrl required for SW gating [ +0.000206] qcom-soundwire 6b10000.soundwire: Failed to get cgcr reset ctrl required for SW gating [ +0.000225] usb_serial_simple 1-1.2.3.2:1.2: google converter detected [ +0.000188] usb 1-1.2.3.2: google converter now attached to ttyUSB2 [ +0.000027] qcom-soundwire 6ab0000.soundwire: Failed to get cgcr reset ctrl required for SW gating [ +0.000230] qcom-soundwire 6b10000.soundwire: Failed to get cgcr reset ctrl required for SW gating [ +0.000638] qcom-soundwire 6ab0000.soundwire: Failed to get cgcr reset ctrl required for SW gating [ +0.000793] qcom-soundwire 6b10000.soundwire: Failed to get cgcr reset ctrl required for SW gating [ +0.000670] qcom-soundwire 6ab0000.soundwire: Failed to get cgcr reset ctrl required for SW gating [ +1.298494] r8152 1-1.1:1.0 enu1u1: carrier on [ +2.497403] usb 1-1: USB disconnect, device number 10 [ +0.000043] r8152-cfgselector 1-1.1: USB disconnect, device number 11 [ +0.091345] usb 1-1.2: USB disconnect, device number 12 [ +0.000016] usb 1-1.2.3: USB disconnect, device number 13 [ +0.000006] usb 1-1.2.3.2: USB disconnect, device number 14 [ +0.000259] google ttyUSB0: google converter now disconnected from ttyUSB0 [ +0.000038] usb_serial_simple 1-1.2.3.2:1.0: device disconnected [ +0.000178] google ttyUSB1: google converter now disconnected from ttyUSB1 [ +0.000021] usb_serial_simple 1-1.2.3.2:1.1: device disconnected [ +0.000113] google ttyUSB2: google converter now disconnected from ttyUSB2 [ +0.000020] usb_serial_simple 1-1.2.3.2:1.2: device disconnected [ +3.425623] usb 3-1: new high-speed USB device number 2 using xhci-hcd [ +0.166121] usb 3-1: New USB device found, idVendor=0bda, idProduct=5412, bcdDevice= 0.02 [ +0.000011] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ +0.000003] usb 3-1: Product: 3-Port USB 2.1 Hub [ +0.000002] usb 3-1: Manufacturer: Generic [ +0.039655] hub 3-1:1.0: USB hub found [ +0.001273] hub 3-1:1.0: 3 ports detected [ +0.066475] qcom-soundwire 6b10000.soundwire: Failed to get cgcr reset ctrl required for SW gating [ +0.000958] qcom-soundwire 6ab0000.soundwire: Failed to get cgcr reset ctrl required for SW gating [ +0.078251] usb 4-1: new SuperSpeed USB device number 2 using xhci-hcd [ +0.044783] usb 4-1: New USB device found, idVendor=0bda, idProduct=0412, bcdDevice= 0.02 [ +0.000019] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ +0.000005] usb 4-1: Product: 2-Port USB 3.1 Hub [ +0.000005] usb 4-1: Manufacturer: Generic [ +0.067026] hub 4-1:1.0: USB hub found [ +0.001501] hub 4-1:1.0: 2 ports detected [ +0.002902] qcom-soundwire 6b10000.soundwire: Failed to get cgcr reset ctrl required for SW gating [ +0.000203] qcom-soundwire 6ab0000.soundwire: Failed to get cgcr reset ctrl required for SW gating [ +0.294795] usb 4-1.1: new SuperSpeed USB device number 3 using xhci-hcd [ +0.022478] usb 4-1.1: New USB device found, idVendor=0bda, idProduct=8153, bcdDevice=31.23 [ +0.000021] usb 4-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=6 [ +0.000005] usb 4-1.1: Product: USB 10/100/1000 LAN [ +0.000004] usb 4-1.1: Manufacturer: Realtek [ +0.000003] usb 4-1.1: SerialNumber: 321000001 [ +0.001447] ucsi_glink.pmic_glink_ucsi pmic_glink.ucsi.0: UCSI_GET_PDOS failed (-70) [ +0.105230] r8152-cfgselector 4-1.1: reset SuperSpeed USB device number 3 using xhci-hcd [ +0.096880] r8152 4-1.1:1.0 eth0: v1.12.13 [ +0.000318] qcom-soundwire 6b10000.soundwire: Failed to get cgcr reset ctrl required for SW gating [ +0.000610] qcom-soundwire 6ab0000.soundwire: Failed to get cgcr reset ctrl required for SW gating [ +0.060636] [drm:dp_ctrl_link_train [msm]] *ERROR* DP link status read failed, err: -5 [ +0.000116] [drm:dp_ctrl_link_train [msm]] *ERROR* link training #1 failed. ret=-22 [ +0.021563] [drm:dp_display_process_hpd_high [msm]] *ERROR* failed to complete DP link training [ +0.000121] [drm:dp_aux_isr [msm]] *ERROR* Unexpected DP AUX IRQ 0x01000000 when not busy [ +0.078489] usb 3-1.2: new high-speed USB device number 3 using xhci-hcd [ +0.117105] usb 3-1.2: New USB device found, idVendor=0bda, idProduct=5411, bcdDevice= 1.26 [ +0.000023] usb 3-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ +0.000005] usb 3-1.2: Product: 4-Port USB 2.1 Hub [ +0.000005] usb 3-1.2: Manufacturer: Generic [ +0.056539] hub 3-1.2:1.0: USB hub found [ +0.001114] hub 3-1.2:1.0: 4 ports detected [ +0.030815] usb 4-1.2: new SuperSpeed USB device number 4 using xhci-hcd [ +0.034733] qcom-soundwire 6b10000.soundwire: Failed to get cgcr reset ctrl required for SW gating [ +0.000442] qcom-soundwire 6ab0000.soundwire: Failed to get cgcr reset ctrl required for SW gating [ +0.003341] usb 4-1.2: New USB device found, idVendor=0bda, idProduct=0411, bcdDevice= 1.26 [ +0.000010] usb 4-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ +0.000005] usb 4-1.2: Product: 4-Port USB 3.1 Hub [ +0.000005] usb 4-1.2: Manufacturer: Generic [ +0.062182] hub 4-1.2:1.0: USB hub found [ +0.001801] hub 4-1.2:1.0: 4 ports detected [ +0.007229] qcom-soundwire 6b10000.soundwire: Failed to get cgcr reset ctrl required for SW gating [ +0.000489] qcom-soundwire 6ab0000.soundwire: Failed to get cgcr reset ctrl required for SW gating [ +0.029244] r8152 4-1.1:1.0 enu1u1: renamed from eth0 [ +0.035984] [drm:dp_ctrl_link_train [msm]] *ERROR* DP link status read failed, err: -5 [ +0.000115] [drm:dp_ctrl_link_train [msm]] *ERROR* link training #1 failed. ret=-22 [ +0.031969] [drm:dp_display_process_hpd_high [msm]] *ERROR* failed to complete DP link training [ +0.000075] [drm:dp_aux_isr [msm]] *ERROR* Unexpected DP AUX IRQ 0x01000000 when not busy [ +0.114964] usb 3-1.2.3: new high-speed USB device number 4 using xhci-hcd [ +0.145077] usb 3-1.2.3: New USB device found, idVendor=04b4, idProduct=6572, bcdDevice=32.99 [ +0.000021] usb 3-1.2.3: New USB device strings: Mfr=10, Product=11, SerialNumber=12 [ +0.000006] usb 3-1.2.3: Product: HX2VL Hub (Four port) [ +0.000005] usb 3-1.2.3: Manufacturer: Cypress Semiconductor [ +0.000004] usb 3-1.2.3: SerialNumber: 0011002A00B2 [ +0.044191] hub 3-1.2.3:1.0: USB hub found [ +0.001591] hub 3-1.2.3:1.0: 4 ports detected [ +0.002047] qcom-soundwire 6b10000.soundwire: Failed to get cgcr reset ctrl required for SW gating [ +0.000655] qcom-soundwire 6ab0000.soundwire: Failed to get cgcr reset ctrl required for SW gating [ +0.167058] [drm:dp_ctrl_link_train [msm]] *ERROR* DP link status read failed, err: -5 [ +0.000126] [drm:dp_ctrl_link_train [msm]] *ERROR* link training #1 failed. ret=-22 [ +0.033703] [drm:dp_display_process_hpd_high [msm]] *ERROR* failed to complete DP link training [ +0.000086] [drm:dp_aux_isr [msm]] *ERROR* Unexpected DP AUX IRQ 0x01000000 when not busy [ +0.089227] usb 3-1.2.3.2: new full-speed USB device number 5 using xhci-hcd [ +0.106499] usb 3-1.2.3.2: New USB device found, idVendor=18d1, idProduct=5014, bcdDevice= 1.00 [ +0.000013] usb 3-1.2.3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=11 [ +0.000002] usb 3-1.2.3.2: Product: Cr50 [ +0.000001] usb 3-1.2.3.2: Manufacturer: Google Inc. [ +0.000002] usb 3-1.2.3.2: SerialNumber: 13024025-94A3D023 [ +0.013058] usb_serial_simple 3-1.2.3.2:1.0: google converter detected [ +0.000330] usb 3-1.2.3.2: google converter now attached to ttyUSB0 [ +0.000485] usb_serial_simple 3-1.2.3.2:1.1: google converter detected [ +0.000016] qcom-soundwire 6b10000.soundwire: Failed to get cgcr reset ctrl required for SW gating [ +0.000314] usb 3-1.2.3.2: google converter now attached to ttyUSB1 [ +0.000573] qcom-soundwire 6ab0000.soundwire: Failed to get cgcr reset ctrl required for SW gating [ +0.000043] usb_serial_simple 3-1.2.3.2:1.2: google converter detected [ +0.000157] qcom-soundwire 6b10000.soundwire: Failed to get cgcr reset ctrl required for SW gating [ +0.000185] usb 3-1.2.3.2: google converter now attached to ttyUSB2 [ +0.000191] qcom-soundwire 6ab0000.soundwire: Failed to get cgcr reset ctrl required for SW gating [ +0.000198] qcom-soundwire 6b10000.soundwire: Failed to get cgcr reset ctrl required for SW gating [ +0.000879] qcom-soundwire 6ab0000.soundwire: Failed to get cgcr reset ctrl required for SW gating [ +0.000178] qcom-soundwire 6b10000.soundwire: Failed to get cgcr reset ctrl required for SW gating [ +0.244916] [drm:dp_ctrl_link_train [msm]] *ERROR* DP link status read failed, err: -5 [ +0.000161] [drm:dp_ctrl_link_train [msm]] *ERROR* link training #1 failed. ret=-22 [ +0.033099] [drm:dp_aux_isr [msm]] *ERROR* Unexpected DP AUX IRQ 0x01000000 when not busy [ +0.000119] [drm:dp_display_process_hpd_high [msm]] *ERROR* failed to complete DP link training [ +0.493467] [drm:dp_ctrl_link_train [msm]] *ERROR* DP link status read failed, err: -5 [ +0.000126] [drm:dp_ctrl_link_train [msm]] *ERROR* link training #1 failed. ret=-22 [ +0.033624] [drm:dp_display_process_hpd_high [msm]] *ERROR* failed to complete DP link training [ +0.000075] [drm:dp_aux_isr [msm]] *ERROR* Unexpected DP AUX IRQ 0x01000000 when not busy [ +0.488707] [drm:dp_ctrl_link_train [msm]] *ERROR* DP link status read failed, err: -5 [ +0.000129] [drm:dp_ctrl_link_train [msm]] *ERROR* link training #1 failed. ret=-22 [ +0.033725] [drm:dp_display_process_hpd_high [msm]] *ERROR* failed to complete DP link training [ +0.000075] [drm:dp_aux_isr [msm]] *ERROR* Unexpected DP AUX IRQ 0x01000000 when not busy [ +0.257835] r8152 4-1.1:1.0 enu1u1: carrier on [ +0.221980] [drm:dp_ctrl_link_train [msm]] *ERROR* DP link status read failed, err: -5 [ +0.000128] [drm:dp_ctrl_link_train [msm]] *ERROR* link training #1 failed. ret=-22 [ +0.033488] [drm:dp_display_process_hpd_high [msm]] *ERROR* failed to complete DP link training [ +0.000112] [drm:dp_aux_isr [msm]] *ERROR* Unexpected DP AUX IRQ 0x01000000 when not busy [ +0.457986] [drm:dp_ctrl_link_train [msm]] *ERROR* DP link status read failed, err: -5 [ +0.000124] [drm:dp_ctrl_link_train [msm]] *ERROR* link training #1 failed. ret=-22 [ +0.030263] [drm:dp_display_process_hpd_high [msm]] *ERROR* failed to complete DP link training [ +0.000126] [drm:dp_aux_isr [msm]] *ERROR* Unexpected DP AUX IRQ 0x01000000 when not busy [ +0.491602] [drm:dp_ctrl_link_train [msm]] *ERROR* DP link status read failed, err: -5 [ +0.000127] [drm:dp_ctrl_link_train [msm]] *ERROR* link training #1 failed. ret=-22 [ +0.032120] [drm:dp_display_process_hpd_high [msm]] *ERROR* failed to complete DP link training [ +0.000085] [drm:dp_aux_isr [msm]] *ERROR* Unexpected DP AUX IRQ 0x01000000 when not busy