# Pastebin v6T0X0U4
connecting to NetworkSerialPort(target=Target(name='am64-sk', env=Environment(config_file='/home/trini/u-boot/lg_env.yaml')), name='USBSerialPort', state=<BindingState.bound: 1>, avail=True, host='ti-lab-host', port=56067, speed=115200, protocol='rfc2217') calling microcom -s 115200 -t ti-lab-host:56067
connected to 192.168.116.10 (port 56067)
Escape character: Ctrl-\
Type the escape character to get to the prompt.

U-Boot SPL 2024.10-rc6-00641-g136b7b6d2e98-dirty (Oct 01 2024 - 23:28:32 +0000)
Resetting on cold boot to workaround ErrataID:i2331
Please resend tiboot3.bin in case of UART/DFU boot
resetting ...

U-Boot SPL 2024.10-rc6-00641-g136b7b6d2e98-dirty (Oct 01 2024 - 23:28:32 +0000)
SYSFW ABI: 3.1 (firmware rev 0x0009 '9.2.7--v09.02.07 (Kool Koala)')
EEPROM not available at 0x50, trying to read at 0x51
SPL initial stack usage: 13368 bytes
Trying to boot from MMC2
Loading Environment from MMC... MMC Device 0 not found
*** Warning - No MMC card found, using default environment

Starting ATF on ARM64 core...

NOTICE:  BL31: v2.10.0(release):v2.10.0-729-gc8be7c08c
NOTICE:  BL31: Built : 13:50:07, Apr 24 2024
I/TC: 
I/TC: OP-TEE version: 4.2.0-22-g16fbd46d2 (gcc version 13.2.0 (GCC)) #2 Wed Apr 24 19:50:23 UTC 2024 aarch64
I/TC: WARNING: This OP-TEE configuration might be insecure!
I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html
I/TC: Primary CPU initializing
I/TC: GIC redistributor base address not provided
I/TC: Assuming default GIC group status and modifier
I/TC: SYSFW ABI: 3.1 (firmware rev 0x0009 '9.2.7--v09.02.07 (Kool Koala)')
I/TC: HUK Initialized
I/TC: Activated SA2UL device
I/TC: Fixing SA2UL firewall owner for GP device
I/TC: Enabled firewalls for SA2UL TRNG device
I/TC: SA2UL TRNG initialized
I/TC: SA2UL Drivers initialized
I/TC: Primary CPU switching to normal world boot

U-Boot SPL 2024.10-rc6-00641-g136b7b6d2e98-dirty (Oct 01 2024 - 23:32:56 +0000)
SYSFW ABI: 3.1 (firmware rev 0x0009 '9.2.7--v09.02.07 (Kool Koala)')
Trying to boot from MMC2


U-Boot 2024.10-rc6-00641-g136b7b6d2e98-dirty (Oct 01 2024 - 23:32:56 +0000)

SoC:   AM64X SR1.0 GP
Model: Texas Instruments AM642 SK
Board: AM64-SKEVM rev E3
DRAM:  2 GiB
Core:  79 devices, 32 uclasses, devicetree: separate
MMC:   mmc@fa00000: 1
Loading Environment from nowhere... OK
In:    serial@2800000
Out:   serial@2800000
Err:   serial@2800000
am65_cpsw_nuss ethernet@8000000: K3 CPSW: nuss_ver: 0x6BA00903 cpsw_ver: 0x6BA80903 ale_ver: 0x00294104 Ports:2
Failed to probe prueth driver
Net:   eth0: ethernet@8000000port@1, eth1: ethernet@8000000port@2
Hit any key to stop autoboot:  2  0 
=>