# Pastebin uS9mlctz
[  146.614446] WCN: marlin_init entry!
[  146.615881] WCN: wcn config bt wake host
[  146.615906] WCN: wcn config wifi wake host
[  146.615919] sdiohal:sdiohal_parse_dt adma_tx:1, adma_rx:1, pwrseq:0, irq type:data, gpio_num:0, blksize:840
[  146.621860] sdiohal:sdiohal_init ok
[  146.622926] WCN: marlin_probe ok!
[  203.893026] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[  203.902118] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[  203.938439] WCN: start_marlin [MARLIN_WIFI]
[  203.938473] WCN: marlin power state:0, subsys: [MARLIN_WIFI] power 1
[  203.938487] WCN: the first power on start
[  203.962684] sdiohal:sdiohal_scan_card
[  203.963061] sdiohal:sdiohal_probe: func->class=0, vendor=0x0000, device=0x0000, func_num=0x0001, clock=50000000
[  203.963286] WCN: marlin_scan_finish!
[  203.963299] sdiohal:probe ok
[  203.963577] sdiohal:scan end!
[  203.963600] WCN: then marlin start to download
[  203.964049] WCN: marlin_get_wcn_chipid: chipid: 0x2355b001
[  203.964089] WCN: marlin_request_firmware from /lib/firmware/wcnmodem.bin start!
[  204.137990] WCN: combin_img 0 marlin_firmware_write finish and successful
[  204.138438] WCN: marlin_start_run read reset reg val:0x1
[  204.138449] WCN: after do marlin_start_run reset reg val:0x0
[  204.138747] WCN: s_marlin_bootup_time=204138746303
[  204.145691] WCN: clock mode: TSX
[  204.145960] WCN: marlin_write_cali_data sync init_state:0xf49f2f2a
[  204.173269] WCN: marlin_write_cali_data sync init_state:0xf49f2f2a
[  204.200307] WCN: marlin_write_cali_data sync init_state:0xf0f0f0f1
[  204.200345] WCN: marlin_send_sdio_config_to_cp sdio_config:0x0 (disable config)
[  204.201190] WCN: marlin_write_cali_data finish
[  204.201618] WCN: check_cp_ready sync val:0xf0f0f0f2, prj_type val:0x0
[  204.226576] WCN: check_cp_ready sync val:0xf0f0f0f2, prj_type val:0x0
[  204.253314] WCN: check_cp_ready sync val:0xf0f0f0f2, prj_type val:0x0
[  204.279953] WCN: check_cp_ready sync val:0xf0f0f0f2, prj_type val:0x0
[  204.306564] WCN: check_cp_ready sync val:0xf0f0f0f2, prj_type val:0x0
[  204.333290] WCN: check_cp_ready sync val:0xf0f0f0f6, prj_type val:0x0
[  204.360103] WCN: check_cp_ready sync val:0xf0f0f0f6, prj_type val:0x0
[  204.387164] WCN: check_cp_ready sync val:0xf0f0f0f6, prj_type val:0x0
[  204.413431] WCN: check_cp_ready sync val:0xf0f0f0f6, prj_type val:0x0
[  204.439918] WCN: check_cp_ready sync val:0xf0f0f0f6, prj_type val:0x0
[  204.466524] WCN: check_cp_ready sync val:0xf0f0f0f6, prj_type val:0x0
[  204.492711] sdiohal:carddump flag set[1]
[  204.492827] sdiohal:disable rx int for dump
[  204.492837] sdiohal:chn8 tx push old, cmdid=0, mstime=0, record_time=0
[  204.492857] chn8 tx push old: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
[  204.492868] sdiohal:chn8 tx denq old, cmdid=0, mstime=0, record_time=0
[  204.492882] chn8 tx denq old: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
[  204.492891] sdiohal:chn22 rx dispatch old, cmdid=0, mstime=0, record_time=0
[  204.492907] chn22 rx dispatch old: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
[  204.492916] sdiohal:chn8 tx push new, cmdid=0, mstime=0, record_time=0
[  204.492930] chn8 tx push new: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
[  204.492940] sdiohal:chn8 tx denq new, cmdid=0, mstime=0, record_time=0
[  204.492954] chn8 tx denq new: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
[  204.492963] sdiohal:chn22 rx dispatch new, cmdid=0, mstime=0, record_time=0
[  204.492978] chn22 rx dispatch new: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
[  235.146038] WCN_ERR: marlin download timeout
[  235.146071] sdiohal:sdiohal_runtime_put entry
[  235.146294] sdiohal:sdiohal_runtime_put wait xmit_cnt end
[  238.369557] unisoc_wifi: probe of unisoc_wifi failed with error -1