# Pastebin 2xMzO3nE


U-Boot SPL 2023.10-rc3-00095-gdcc3239a166c-dirty (Aug 23 2023 - 17:48:36 -0500)
SYSFW ABI: 3.1 (firmware rev 0x0009 '9.0.7--v09.00.07 (Kool Koala)')
SPL initial stack usage: 13368 bytes
Trying to boot from MMC2
Starting ATF on ARM64 core...

NOTICE:  BL31: v2.9(debug):v2.9.0-560-g74e3959ea39e
NOTICE:  BL31: Built : 17:48:35, Aug 23 2023
INFO:    GICv3 without legacy support detected.
INFO:    ARM GICv3 driver initialized in EL3
INFO:    Maximum SPI INTID supported: 287
INFO:    SYSFW ABI: 3.1 (firmware rev 0x0009 '9.0.7--v09.00.07 (Kool Koala)')
INFO:    BL31: Initializing runtime services
INFO:    BL31: cortex_a53: CPU workaround for 855873 was applied
INFO:    BL31: cortex_a53: CPU workaround for 1530924 was applied
INFO:    BL31: Initializing BL32
I/TC: 
I/TC: OP-TEE version: 3.22.0-73-gd93f6d059a57 (gcc version 12.3.1 20230626 (Arm GNU Toolchain 12.3.Rel1 (Build arm-12.35))) #1 Wed Aug 23 22:48:35 UTC 2023 aarch64
I/TC: WARNING: This OP-TEE configuration might be insecure!
I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html
I/TC: Primary CPU initializing
I/TC: SYSFW ABI: 3.1 (firmware rev 0x0009 '9.0.7--v09.00.07 (Kool Koala)')
I/TC: HUK Initialized
I/TC: Primary CPU switching to normal world boot
INFO:    BL31: Preparing for EL3 exit to normal world
INFO:    Entry point address = 0x80080000
INFO:    SPSR = 0x3c9

U-Boot SPL 2023.10-rc3-00095-gdcc3239a166c-dirty (Aug 23 2023 - 17:48:38 -0500)
SYSFW ABI: 3.1 (firmware rev 0x0009 '9.0.7--v09.00.07 (Kool Koala)')
SPL initial stack usage: 1696 bytes
Trying to boot from MMC2


U-Boot 2023.10-rc3-00095-gdcc3239a166c-dirty (Aug 23 2023 - 17:48:38 -0500)

SoC:   AM62X SR1.0 GP
Model: BeagleBoard.org BeaglePlay
DRAM:  2 GiB
Core:  96 devices, 27 uclasses, devicetree: separate
MMC:   mmc@fa10000: 0, mmc@fa00000: 1, mmc@fa20000: 2
Loading Environment from nowhere... OK
In:    serial@2800000
Out:   serial@2800000
Err:   serial@2800000
Net:   No ethernet found.

Press SPACE to abort autoboot in 2 seconds
switch to partitions #0, OK
mmc1 is current device
SD/MMC found on device 1
Failed to load 'boot.scr'
Failed to load 'uEnv.txt'
Scanning for bootflows in all bootdevs
Seq  Method       State   Uclass    Part  Name                      Filename
---  -----------  ------  --------  ----  ------------------------  ----------------
Scanning bootdev 'mmc@fa00000.bootdev':
  0  extlinux     ready   mmc          1  mmc@fa00000.bootdev.part_ /extlinux/extlinux.conf
** Booting bootflow 'mmc@fa00000.bootdev.part_1' with extlinux
1:	Linux microSD
Retrieving file: /Image
append: root=/dev/mmcblk1p2 ro rootfstype=ext4 rootwait net.ifnames=0 quiet
Retrieving file: /dtbs/ti/k3-am625-beagleplay.dtb
## Flattened Device Tree blob at 88000000
   Booting using the fdt blob at 0x88000000
Working FDT set to 88000000
   Loading Device Tree to 000000008fff3000, end 000000008ffffab4 ... OK
Working FDT set to 8fff3000

Starting kernel ...

I/TC: Secondary CPU 1 initializing
I/TC: Secondary CPU 1 switching to normal world boot
I/TC: Secondary CPU 2 initializing
I/TC: Secondary CPU 2 switching to normal world boot
I/TC: Secondary CPU 3 initializing
I/TC: Secondary CPU 3 switching to normal world boot